Is TDS same as GH? Conversion? Quick response appreciated!!
-
- Posts: 89
- Joined: 21 Apr 2003, 11:47
- Location 1: Connah's Quay, Wales, UK
- Interests: Corydoras!!!
Is TDS same as GH? Conversion? Quick response appreciated!!
I have just bought a conductivity meter which will automatically convert into TDS (Total Dissolved Solids) in ppm. Now I know that to convert to degrees dH, you simply divide this by 17.9, but is this result simply the TDS converted to dh, or is this value the same as GH?
If not, how do I convert between TDS and GH? (or conductivity)
If not, how do I convert between TDS and GH? (or conductivity)
Every morning when I wake, I thank the Lord I'm Welsh!
-
- Posts: 89
- Joined: 21 Apr 2003, 11:47
- Location 1: Connah's Quay, Wales, UK
- Interests: Corydoras!!!
Thanks caol-ila,
I was under the impression that GH included KH, or is it,
GH + KH = Total Hardness = TDS?
In either case what TDS (or conductivity) value should I be after for a cory/discus setup?
Also, the conductivity reading is in micro-siemens, but my meter can convert to TDS in ppm. I thought this may be useful as I know that dividing by 17.9 will give degrees dH provided that GH and TDS are the same thing.
I was under the impression that GH included KH, or is it,
GH + KH = Total Hardness = TDS?
In either case what TDS (or conductivity) value should I be after for a cory/discus setup?
Also, the conductivity reading is in micro-siemens, but my meter can convert to TDS in ppm. I thought this may be useful as I know that dividing by 17.9 will give degrees dH provided that GH and TDS are the same thing.
Every morning when I wake, I thank the Lord I'm Welsh!
-
- Posts: 89
- Joined: 21 Apr 2003, 11:47
- Location 1: Connah's Quay, Wales, UK
- Interests: Corydoras!!!
So we are agreed then that GH includes KH and that GH is the same as TDS?
I was thinking maybe thatGH is the amount of dissolved calcium and magnesium in water as this is what most GH test kits test for. GH, then, must include ALL ions in the water so must be the same as TDS.
Also, what KH value should I be after. I've read that 8 is what you should aim for, but I have spoken to a few people and read in other places that a KH of 3 is fine. Obviously, a lower KH would help give a lower pH, so should I be striving for no lower than 3?
Also, to re-mineralise RO water, I have been told that I shgould raise GH to around 3 first and then add sufficient KH changer (I use sodium bicarbonate which is far cheaper than the expensive manufactured liquids and does a far better job imo) to increase KH to 3 or slightly over. This would probably give a GH (or TDS) of around 4-6. Is this fine for discus and corys?
I was thinking maybe thatGH is the amount of dissolved calcium and magnesium in water as this is what most GH test kits test for. GH, then, must include ALL ions in the water so must be the same as TDS.
Also, what KH value should I be after. I've read that 8 is what you should aim for, but I have spoken to a few people and read in other places that a KH of 3 is fine. Obviously, a lower KH would help give a lower pH, so should I be striving for no lower than 3?
Also, to re-mineralise RO water, I have been told that I shgould raise GH to around 3 first and then add sufficient KH changer (I use sodium bicarbonate which is far cheaper than the expensive manufactured liquids and does a far better job imo) to increase KH to 3 or slightly over. This would probably give a GH (or TDS) of around 4-6. Is this fine for discus and corys?
Every morning when I wake, I thank the Lord I'm Welsh!
-
- Posts: 89
- Joined: 21 Apr 2003, 11:47
- Location 1: Connah's Quay, Wales, UK
- Interests: Corydoras!!!
Actually, looking on the net yet again, I've found a few sites that say that TDS has little to do with GH!!
TDS embraces GH and KH as Colia originally said as well as other dissolved metals not included in GH and KH.
GH is only a measurement of all the divalent metal ions, predominantly Ca++ and Mg++.
There is a relationship between TDS and GH though especially if you are using RO water so you know exactly what is in your water!!
This whole problem came from the fact that I could not raise GH easily using Kent RO Right using a test kit. As I mentioned earlier, test kits only measure dissolved Calcium and Magnesium which normally are by far and away the most predominant divalent metals in water. However, it looks as if RO Right contains a considerable amount of other salts which do not contribute to GH. I ended up more than doubling the dosage to get a GH of 2dH!! Of course, now, my TDS value is very high, 400ppm!! I'm off to dilute this gradually!!
TDS embraces GH and KH as Colia originally said as well as other dissolved metals not included in GH and KH.
GH is only a measurement of all the divalent metal ions, predominantly Ca++ and Mg++.
There is a relationship between TDS and GH though especially if you are using RO water so you know exactly what is in your water!!
This whole problem came from the fact that I could not raise GH easily using Kent RO Right using a test kit. As I mentioned earlier, test kits only measure dissolved Calcium and Magnesium which normally are by far and away the most predominant divalent metals in water. However, it looks as if RO Right contains a considerable amount of other salts which do not contribute to GH. I ended up more than doubling the dosage to get a GH of 2dH!! Of course, now, my TDS value is very high, 400ppm!! I'm off to dilute this gradually!!
Every morning when I wake, I thank the Lord I'm Welsh!
- fmueller
- Posts: 55
- Joined: 23 Feb 2004, 17:18
- Location 1: Kent, OH
- Location 2: Kent, OH, USA
- Interests: Visit www.fmueller.com to find out!
- Contact:
I was wondering about this myself and this thread has cleared up the issue. This site confirms what you concluded in your last post:
http://www.thetropicaltank.co.uk/hardness.htm
http://www.thetropicaltank.co.uk/hardness.htm