Am continuing my Amazon theme for my Jaguar tank and would love to put a branch of wood in there as I feel it looks much more natural. Would the piece of wood in this picture be suitable?
I have looked for some time for similar to this and finally found it, just curious if it would be safe enough with the Jaguars (given its obvious pointy bits).
Many thanks
Re: Would this piece of wood be good?
Posted: 01 Nov 2011, 16:31
by MatsP
Any chance of a picture that is bigger than a stamp? ;)
--
Mats
Re: Would this piece of wood be good?
Posted: 01 Nov 2011, 18:40
by redfan
Sorry ... I took it from ebay .. cannot grab the large image, but feel free to take a look at the item
You will be able to see the full size image there hope it helps.
Re: Would this piece of wood be good?
Posted: 01 Nov 2011, 19:41
by MatsP
Looks fine to me.
--
Mats
Would this piece of wood be good?
Posted: 01 Nov 2011, 20:25
by Martin S
Yes, looks fine to me too. Just be aware, that type of wood will go 'mouldy' under water initially and most likely won't sink for a few days to a week - just soak it, initially in hot water then keep it soaking until it sinks.
Martin
Re: Would this piece of wood be good?
Posted: 01 Nov 2011, 21:12
by redfan
Thanks
Re: Would this piece of wood be good?
Posted: 07 Nov 2011, 01:55
by redfan
Thought I would reply and include a video of the piece of wood now it is soaked and in the tank
Re: Would this piece of wood be good?
Posted: 07 Nov 2011, 02:08
by racoll
Have you thought about positioning the wood vertically to hide the filter pipes?
hope it helps.